Description:
The KWS Series Rack and Panel connectors mate with TB and Alpha-Numeric Series incandescent displays. Standard contact termination is uninsulated 1" solid #25 AWG tin plated copper leads which can be easily spread apart for hard wiring or direct connection to your PC board. Gold plated leads are available upon request (-GPL after part number). Optional termination is #26 AWG, TFE insulated. Type ET wire leads are per MIL-W-16678. Please consult Wamco for special hookup wire to meet your specific requirements.

Materials:
•  Insulator: Polyphenylene Sulfide per MIL-P-46174 or Diallyl Phthalate per MIL-M-14 Type SDG-F.
•  Contact: Copper alloy and beryllium copper, .000050" gold over copper flash per MIL-G-12004, Type II.
•  Standard Termination: 25 AWG solid copper tin plated.
• Optional Termination: 26 AWG stranded wire, TFE insulator per MIL-W-16878, Type ET. Specify by adding suffix "W" and lead length (in inches) to part number.

Specifications:
•  Dielectric withstanding voltage: 500 VAC RMS.
•  Current rating: 3 amperes (max.)
•  Contact resistance: 4 milliohms, nominal.
•  Insulation resistance: 5,000 megohms, minimum.
•  Vibration: No discontinuity in excess of 1 microsecond during twelve 20 minute sweeps from 10 to 2,000 HZ at .060 DA or 20 G's whichever is less.
•  Marking: Per MIL-STD-1285.
•  Temperature: -65°C to +125°C (operating)
• Contact Engaging Force: 6 oz. per contact maximum
•  Contact Separation Force: 1/2 oz. per contact minimum.

Description:
This KWS Series connectors mate with all .020 Diameter pin series incandescent displays, and can be mounted directly to your PC board. High temperature body materials will not soften during soldering.

The advanced contact design of these connectors offer long life and consistent insertion and withdrawal forces. Electrical and mechanical characteristics are maintained after many insertions.

Materials:
•  Insulator: Polyphenylene Sulfide per MIL-P-46174 or Diallyl Phthalate per MIL-M-14 Type SDG-F
•  Terminal: Brass per QQ-B-626. .00020 thick tin per MIL-T-10727 over copper per MIL-C-14450
•  Contact: Beryllium copper per QQ-C-533. .00003 thick gold per MIL-G-45204 over nickel per QQ-N-290

Specifications:
•  Rated Voltage: 28 volts DC
•  Rated Current: 500 Milliamps
•  Insertion & Withdrawal Force: 4-18 ounces .020 +/- .001 diameter pin
•  Durability: 100 mating cycles without mechanical degradation